F2

NO Title Updated Download
1 How to check the current gateway IP address? 2018-11-27


     It is suitable for: All TOTOLINK routers

Application introduction:This article describes the Windows operating system computer connected to the router (or other network device) by wireless or wired, view the gateway IP address of the current router.

     Method One

For Windows W10:

STEP-1. TOTOLINK Router LAN Port Connects the PC Or wirelessly connect to TOTOLINK Router WIFI.

STEP-2. Right-click the Network Connections icon, click on “Network & Internet settings”.

5bfcb0fcc5073.png

STEP-3. Pop up the Network & Internet Center interface, click on “Network and Sharing Centre” under Related settings.

5bfcb106ab313.png

STEP-4. Click connections target

5bced8f5464e3.png

STEP-5. Clink Details…

5bced8feac5bc.png

STEP-6. Find to IPv4 Default Gateway, This is the current gateway address of your router.

5bced9091d00f.png

     Method Two

For Windows 7,8, 8.1 and 10:

STEP-1. Click on windows key+ R key on the keyboard at the same time. 

5bced9172386d.png   R

STEP-2. Enter cmd in the field and click OK button.

5bced97d23b75.png

STEP-3. Type in ipconfig and click enter key. Find to IPv4 Default Gateway, This is the current gateway address of your router.

5bced98262f30.png

2 How to configure TCP/IP properties of my computer 2018-11-27


     It is suitable for: All TOTOLINK routers

Application introduction: To enter the router’s setting interface, you may enter the specified IP if you know setup your PC or set your PC to obtain an IP address automatically.

The steps for configuring TCP/IP properties (Here I take system W10 for example).

STEP-1: 

Click on 5bd8245e23eff.png  at the bottom right corner on the screen

5bd824bfa46f6.png

STEP-2: 

Click on [Properties] button in the lower left corner

5bd825365e4d4.png

STEP-3:

Double click on “Internet Protocol (TCP/IP)”

5bd8253d314c5.png

STEP-4: 

Now you have two ways to configure the TCP/IP protocol below:

4-1. Assigned by DHCP Sever

Select Obtain an IP address automatically and Obtain DNS Server address automatically, as shown in the figure below. These may be selected by default. Then click OK to save setting.

5bd8254323c81.png

4-2. Assigned manually

Using the following IP Address, as shown in the following figure.

[1] If the router’s LAN IP address is 192.168.1.1, please type in IP address 192.168.1.x (“x” range from 2 to 254), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.1.1.

5bd8264719ef9.png

[2] If the router’s LAN IP address is 192.168.0.1, please type in IP address 192.168.0.x (“x” range from 2 to 254), the Subnet Mask is 255.255.255.0 and Gateway is 192.168.0.1.

5bd8262a32175.png

STEP-5:  

Check the IP address you get automatically in the former step

5bd82563b6318.png

The IP address is 192.168.0.2, it means the network segment of your PC is 0, you should enter http://192.168.0.1 into the address bar of your browser.

Enter the router’s setting interface similarly and do some settings.


3 How to use Ping Command 2018-11-01


     It is suitable for: All TOTOLINK routers

Application introduction: Ping is used to test connectivity to a specific host in the network with the use of Internet Protocol (IP) address or a specific website URL.

     Method One
For Windows W7:

STEP-1. Click Start-> Run.

 5bd82cdf30c59.png

STEP-2. Enter cmd in the field and click OK button.

 5bd82ce4047ba.png

STEP-3. Type in Ping 192.168.1.1 and click enter key.

5bd82ce96dd39.png


     method Two

For Windows 7,8, 8.1 and 10:

STEP-1. Click on windows key+ R key on the keyboard at the same time. 

 5bd82d178994f.png+‘R’

STEP-2. Enter cmd in the field and click OK button.

5bd82d1e47cd2.png

STEP-3. Type in Ping 192.168.1.1 and click enter key.

5bd82d250d9ac.png

4 How to Find the Hardware Version on a TOTOLINK device 2018-11-08


     It is suitable for: All TOTOLINK Model

Application introduction: 

Some TOTOLINK products have more than one hardware version, using V1, V2, etc for separation, and generally, each hardware version corresponds to a specifically developed firmware. 

If you want to upgrade your device to the latest firmware, you need to choose the correct firmware version for your device. 

【 CAUTION 】

All content on this website is only applicable to models selling in overseas markets (outside China   mainland, Taiwan and South Korea ),  any model purchased from China mainland,Taiwan or South Korea caused damage by upgrading software on this website is excluded in after-sales service range

For most TOTOLINK products, you can see a bar coded sticker at the front of the device, there is a  character string “VX.Y” (for example, V1.1), See below:  

5bd917f105b9c.png

5bd917f79a2ea.png

The number X is the Hardware Version of your device. If the string shows “V1.y”, it means the hardware version is V1.


5 How to manually set an IP address 2018-11-27


     It is suitable for: All TOTOLINK routers

Application introduction: This article will illustrate way to manually set an IP address on Windows 10/Mobile phone.

Manually set IP address on Windows 10

     Set up steps

1-1. Find the small computer icon in the lower right corner of your computer desktop 5bdc16095deac.png,click on “Network & Internet settings”.

5bfcb569c4361.png

1-2. Pop up the Network & Internet Center interface, click on “Change adapter options” under Related settings.

5bdc163950614.png

1-3. After open changing adapter options,find Ethernet,click and select Properties.(If you want to check the wireless IP address, find WLAN)

5bdc174d4007f.png

1-4. Select “Internet Protocol Version 4 (TCP/IPv4)”,click on “Properties”.

5bdc17a461560.png

1-5. To manually set IP address, select “Use the following IP address”, set the IP address and subnet mask; Finally click on“ok”.Take the IP address 192.168.0.10 as an example.

5bdc17b256c97.png

1-6. When you don't need to set the IP address manually, Please select Obtain an IP address automatically and Obtain DNS Server address automatically.

5bdc17c4a2848.png

Manually set IP address on Mobile phone

     Set up steps

1-1. Click Settings on the screen-> Wireless Network (or Wi-Fi), click on the exclamation mark behind the wireless signal.

5bdc17ce5bdbf.png

Note: Before manually set IP address , make sure the wireless terminal is currently connected or is connecting to the wireless signal.

1-2. Click Static, enter the corresponding parameters in the IP address, gateway, and network mask positions, and click Save. Take the IP address 192.168.0.10 as an example.

5bdc19ada61ce.png

1-3. When you don't need to set the IP address manually, Please turn off static IP.

5bdc184c2d2f0.png