NO Title Updated Download
1 A1000UA Channel Range Change 2018-10-30

     It is suitable for: A1000UA

STEP-1: Open the device manager

①Right-click This PC and select manage


② Click device manager

③ Click network adapters

④ Select 802.11ac Wireless LAN Card


STEP-2: Choose 2.4G country region

① Right click→properties

② Click Advanced

③ Click Country Region(2.4GHz)

④ In Value options select #1(1-13)

Note: Can meet most of the router (AP) requirements


STEP-3: Choose 5G country region

① Click Country Region(5GHz)

② In Value options select #16(36-173)

Note: Can meet most of the router (AP) requirements


2 How to install the driver for wireless adapter in XP system 2018-10-30

     It is suitable for:  All TOTOLINK adapters.

Application introduction: The procedures in different systems are quite similar, therefore, here takes the procedures in Windows XP for example.


Insert the Resource CD into your CD-ROM drive, the window (Figure 1) will appear. Please choose the model No. (Ex. A1000UA) from the drop-down list and click Install.



Follow the instructions step-by-step to complete Installation.



3 How to Find the Hardware Version on a TOTOLINK device 2018-11-08

     It is suitable for: All TOTOLINK Model

Application introduction: 

Some TOTOLINK products have more than one hardware version, using V1, V2, etc for separation, and generally, each hardware version corresponds to a specifically developed firmware. 

If you want to upgrade your device to the latest firmware, you need to choose the correct firmware version for your device. 


All content on this website is only applicable to models selling in overseas markets (outside China   mainland, Taiwan and South Korea ),  any model purchased from China mainland,Taiwan or South Korea caused damage by upgrading software on this website is excluded in after-sales service range

For most TOTOLINK products, you can see a bar coded sticker at the front of the device, there is a  character string “VX.Y” (for example, V1.1), See below:  



The number X is the Hardware Version of your device. If the string shows “V1.y”, it means the hardware version is V1.

4 How to properly download upgrade firmware of extender? 2019-08-29
     It is suitable for:  All TOTOLINK extenders


★ Before downloading files. please confirm the hardware version ofyour device and choose the corresponiding firmware version to uparade. 

★ Wrong firrmware version may damage your device and no warrante.

Set up steps

STEP-1: Guide for Hardware Version

For most TOTOLINK extender, you can see two bar coded stickers at the front of the device, the character string started with Model No.(for example EX200) and ended with Hardware Version (for example V1.0) is the serial number of your device. See below:



Open browser, enter www.totolink.net Download the required files.

For example, if your hardware yersion is V1.0 , please download V1 version. 

Note: If the hardware version is V1, V1 will be hidden.



Unzip the file, correct upgrade file name is suffixed with ”web” or “bin” (except for some special models)